Nocks
Now that I've got the shafts sealed the way I want them, its time to put nocks on.
Lay your shafts and nocks out
...with your glue at hand
Find the grain and allign horizontally:
Lay a bead of glue on the nock taper
Install nock and rotate for an even lay of glue and allign the nock so the grain will be at a 90 degree angle with the string when nocked. When the nock is fully seated, remove excess glue
Allow the glue time to set, as soon as 5 minutes with the Duco Cement
And you're ready for fletching.
Threaded Mode