Lone Star Bowhunters Association - View Single Post

Bill M · 09-20-2007, 04:42 PM

I wanted to give kudos to this company for this little item that I recently put on my '07 Bowtech Allegiance. I bought it through Ye Olde Archery Shoppe and what caught my attention was that the grooves where the cables rest are cut on a radius and not flat. This means the cables don't rub on a distinct edge on top and bottom of the slide and I can feel this difference. The best thing about it is that it gives more clearance on my Allegiance which was a concern with the stock slide. I have also heard of this being a concern on other Bowtech models. I did have the cock vane point out from the bow riser but now have it down as I have usually shot them. This little item IMO made a difference in how the bow shoots and in my confidence in the bow.

3470.jpg

09-20-2007, 04:42 PM	#1
Bill M Super Moderator Join Date: Aug 2004 LSBA Region: 77 Location: Bryan Posts: 190 Points: 780.00	Parker Productions Radius Cable Slide I wanted to give kudos to this company for this little item that I recently put on my '07 Bowtech Allegiance. I bought it through Ye Olde Archery Shoppe and what caught my attention was that the grooves where the cables rest are cut on a radius and not flat. This means the cables don't rub on a distinct edge on top and bottom of the slide and I can feel this difference. The best thing about it is that it gives more clearance on my Allegiance which was a concern with the stock slide. I have also heard of this being a concern on other Bowtech models. I did have the cock vane point out from the bow riser but now have it down as I have usually shot them. This little item IMO made a difference in how the bow shoots and in my confidence in the bow. 3470.jpg __________________ Bill Morris, just a hunter and my Grandkid's Papa Formerly known as "TexHunter" Last edited by Bill M; 09-20-2007 at 07:07 PM..